- About us
- Products
- Purchases / tenders
- News
- Technologies
- Certifications
- Contacts
Carbon paste
Cold-ramming carbon paste is used for filling expansion clearances in the lining of blast furnaces and other types of metallurgical furnaces.
|
Properties |
Units of measurement |
Typical values |
|
|
Grade |
|
MHTD |
MHD |
|
Bulk density (unbaked paste) |
kg/m3 |
1670 |
1600 |
|
Compression paste (baked paste) |
MPa |
24 |
25 |
|
Heat conductivity at 100 ºС |
W/m•K |
12 |
8 |
The above values are average values and they do not constitute a specification.
Solid carbon paste (MUT grade) is used for filling expansion clearances in the lining of blast furnaces and other types of metallurgical furnaces.
|
Properties |
Units of measurement |
Typical values |
|
Compression paste (baked paste) |
MPa |
38 |
|
Heat conductivity at 100 ºС |
W/m•K |
9 |
|
Volatiles (unbaked paste) |
% |
11 |
The above values are average values and they do not constitute a specification.
Soft carbon paste (MUP grade) is used for filling joints between carbon or graphite blocks during erection.
|
Properties |
Units of measurement |
Typical values |
|
Viscosity |
s |
130 |
|
Cementing ability |
MPa |
3.5 |
The above values are average values and they do not constitute a specification.
The chief expert in lining products for metallurgical facilities can be reached at hlopkov@ukrgrafit.com.ua.